And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.794
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.564
And
I accept adding "cowsay" to Additional Software
4.854
And
Additional Software is correctly configured for package "cowsay"
0.521
And
I shutdown Tails and wait for the computer to power off
2.519
And
I start Tails from USB drive "__internal" with network unplugged
31.939
And
I enable persistence
10.649
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
7.161
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.433
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
I prepare the Additional Software upgrade process to fail
0.040
And
the network is plugged
0.035
And
available upgrades have been checked
1.131
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.793
And
I can open the Additional Software configuration window from the notification
2.423
And
I shutdown Tails and wait for the computer to power off
12.489
And
I start Tails from USB drive "__internal" with network unplugged
32.252
And
I enable persistence
10.937
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.530
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.171
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
the network is plugged
0.029
Then
the Additional Software upgrade service has started
0.048
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.065