And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.399
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.517
And
I accept adding "cowsay" to Additional Software
3.602
And
Additional Software is correctly configured for package "cowsay"
0.652
And
I shutdown Tails and wait for the computer to power off
4.102
And
I start Tails from USB drive "__internal" with network unplugged
36.263
And
I enable persistence
8.533
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
8.582
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.212
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.017
And
available upgrades have been checked
1.143
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.533
And
I can open the Additional Software configuration window from the notification
2.563
And
I shutdown Tails and wait for the computer to power off
17.045
And
I start Tails from USB drive "__internal" with network unplugged
36.138
And
I enable persistence
9.352
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
9.629
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.215
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.013
Then
the Additional Software upgrade service has started
0.056
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.081