And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:11.701
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.606
And
I accept adding "cowsay" to Additional Software
5.307
And
Additional Software is correctly configured for package "cowsay"
0.517
And
I shutdown Tails and wait for the computer to power off
3.972
And
I start Tails from USB drive "__internal" with network unplugged
31.533
And
I enable persistence
9.679
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.046
And
I log in to a new session
7.404
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.361
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.039
And
the network is plugged
0.027
And
available upgrades have been checked
0.045
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.963
And
I can open the Additional Software configuration window from the notification
2.382
And
I shutdown Tails and wait for the computer to power off
12.407
And
I start Tails from USB drive "__internal" with network unplugged
32.378
And
I enable persistence
10.325
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.513
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.167
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
the network is plugged
0.032
Then
the Additional Software upgrade service has started
0.036
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.046