And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.968
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.605
And
I accept adding "cowsay" to Additional Software
3.570
And
Additional Software is correctly configured for package "cowsay"
0.551
And
I shutdown Tails and wait for the computer to power off
7.987
And
I start Tails from USB drive "__internal" with network unplugged
35.161
And
I enable persistence
5.609
And
I configure APT to prefer an old version of cowsay
0.008
And
I disable the tails-virt-notify-user.service user unit
0.065
And
I log in to a new session
9.542
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.210
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.060
And
the network is plugged
0.013
And
available upgrades have been checked
1.093
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.954
And
I can open the Additional Software configuration window from the notification
2.572
And
I shutdown Tails and wait for the computer to power off
22.133
And
I start Tails from USB drive "__internal" with network unplugged
35.824
And
I enable persistence
5.697
And
I configure APT to prefer an old version of cowsay
0.008
And
I log in to a new session
10.142
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.188
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.050
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.068