And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.843
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.742
And
I accept adding "cowsay" to Additional Software
3.658
And
Additional Software is correctly configured for package "cowsay"
0.607
And
I shutdown Tails and wait for the computer to power off
7.921
And
I start Tails from USB drive "__internal" with network unplugged
36.601
And
I enable persistence
6.225
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.050
And
I log in to a new session
8.610
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.219
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
I prepare the Additional Software upgrade process to fail
0.065
And
the network is plugged
0.018
And
available upgrades have been checked
2.161
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.424
And
I can open the Additional Software configuration window from the notification
2.593
And
I shutdown Tails and wait for the computer to power off
22.192
And
I start Tails from USB drive "__internal" with network unplugged
36.216
And
I enable persistence
6.141
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
9.104
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.201
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.057
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.071