And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.919
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.172
And
I accept adding "cowsay" to Additional Software
6.083
And
Additional Software is correctly configured for package "cowsay"
0.599
And
I shutdown Tails and wait for the computer to power off
3.849
And
I start Tails from USB drive "__internal" with network unplugged
33.745
And
I enable persistence
11.213
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.041
And
I log in to a new session
8.459
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.172
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.046
And
available upgrades have been checked
0.057
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.850
And
I can open the Additional Software configuration window from the notification
2.631
And
I shutdown Tails and wait for the computer to power off
12.924
And
I start Tails from USB drive "__internal" with network unplugged
35.587
And
I enable persistence
17.050
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
9.634
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.182
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.084
And
the network is plugged
0.486
Then
the Additional Software upgrade service has started
0.041
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.046