And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.594
And
I configure APT to prefer an old version of cowsay
0.023
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.847
And
I accept adding "cowsay" to Additional Software
5.139
And
Additional Software is correctly configured for package "cowsay"
0.505
And
I shutdown Tails and wait for the computer to power off
3.940
And
I start Tails from USB drive "__internal" with network unplugged
35.559
And
I enable persistence
11.533
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.047
And
I log in to a new session
8.153
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.244
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
I prepare the Additional Software upgrade process to fail
0.057
And
the network is plugged
0.030
And
available upgrades have been checked
1.081
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.269
And
I can open the Additional Software configuration window from the notification
2.561
And
I shutdown Tails and wait for the computer to power off
12.020
And
I start Tails from USB drive "__internal" with network unplugged
33.986
And
I enable persistence
12.121
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
9.049
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.163
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.037
Then
the Additional Software upgrade service has started
0.043
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.055