And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.134
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.991
And
I accept adding "cowsay" to Additional Software
4.976
And
Additional Software is correctly configured for package "cowsay"
0.781
And
I shutdown Tails and wait for the computer to power off
8.473
And
I start Tails from USB drive "__internal" with network unplugged
39.014
And
I enable persistence
6.907
And
I configure APT to prefer an old version of cowsay
0.020
And
I disable the tails-virt-notify-user.service user unit
0.077
And
I log in to a new session
12.246
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.597
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.014
And
available upgrades have been checked
1.236
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.198
And
I can open the Additional Software configuration window from the notification
2.626
And
I shutdown Tails and wait for the computer to power off
12.286
And
I start Tails from USB drive "__internal" with network unplugged
39.366
And
I enable persistence
7.412
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
12.609
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.219
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.064
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.066