And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.198
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.398
And
I accept adding "cowsay" to Additional Software
3.996
And
Additional Software is correctly configured for package "cowsay"
0.580
And
I shutdown Tails and wait for the computer to power off
4.318
And
I start Tails from USB drive "__internal" with network unplugged
34.829
And
I enable persistence
11.572
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.044
And
I log in to a new session
7.458
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.207
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.041
And
the network is plugged
0.036
And
available upgrades have been checked
1.104
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.370
And
I can open the Additional Software configuration window from the notification
2.612
And
I shutdown Tails and wait for the computer to power off
13.315
And
I start Tails from USB drive "__internal" with network unplugged
33.377
And
I enable persistence
11.045
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.143
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.194
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.024
Then
the Additional Software upgrade service has started
0.036
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058