And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.759
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.924
And
I accept adding "cowsay" to Additional Software
4.871
And
Additional Software is correctly configured for package "cowsay"
0.580
And
I shutdown Tails and wait for the computer to power off
7.909
And
I start Tails from USB drive "__internal" with network unplugged
35.948
And
I enable persistence
10.229
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.046
And
I log in to a new session
8.954
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.501
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.038
And
the network is plugged
0.015
And
available upgrades have been checked
2.152
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.053
And
I can open the Additional Software configuration window from the notification
2.555
And
I shutdown Tails and wait for the computer to power off
17.268
And
I start Tails from USB drive "__internal" with network unplugged
35.987
And
I enable persistence
9.883
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
9.897
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.190
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.080
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.064