And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.577
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.402
And
I accept adding "cowsay" to Additional Software
3.608
And
Additional Software is correctly configured for package "cowsay"
0.596
And
I shutdown Tails and wait for the computer to power off
2.700
And
I start Tails from USB drive "__internal" with network unplugged
34.695
And
I enable persistence
8.674
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.073
And
I log in to a new session
9.765
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.215
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.063
And
the network is plugged
0.015
And
available upgrades have been checked
1.097
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.461
And
I can open the Additional Software configuration window from the notification
2.482
And
I shutdown Tails and wait for the computer to power off
23.183
And
I start Tails from USB drive "__internal" with network unplugged
35.042
And
I enable persistence
8.357
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
10.358
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.193
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.099
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.077