And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.422
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.855
And
I accept adding "cowsay" to Additional Software
5.040
And
Additional Software is correctly configured for package "cowsay"
0.695
And
I shutdown Tails and wait for the computer to power off
4.239
And
I start Tails from USB drive "__internal" with network unplugged
39.472
And
I enable persistence
9.607
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
10.047
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.258
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.023
And
available upgrades have been checked
2.156
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.481
And
I can open the Additional Software configuration window from the notification
2.532
And
I shutdown Tails and wait for the computer to power off
19.537
And
I start Tails from USB drive "__internal" with network unplugged
38.983
And
I enable persistence
11.370
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.281
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.207
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.063
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058