And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.909
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.317
And
I accept adding "cowsay" to Additional Software
5.342
And
Additional Software is correctly configured for package "cowsay"
0.502
And
I shutdown Tails and wait for the computer to power off
2.557
And
I start Tails from USB drive "__internal" with network unplugged
33.037
And
I enable persistence
11.004
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.045
And
I log in to a new session
7.240
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.257
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
I prepare the Additional Software upgrade process to fail
0.039
And
the network is plugged
0.033
And
available upgrades have been checked
0.045
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.307
And
I can open the Additional Software configuration window from the notification
2.424
And
I shutdown Tails and wait for the computer to power off
17.654
And
I start Tails from USB drive "__internal" with network unplugged
32.481
And
I enable persistence
11.621
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
8.619
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.173
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
the network is plugged
0.026
Then
the Additional Software upgrade service has started
0.048
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.053