And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.230
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.486
And
I accept adding "cowsay" to Additional Software
3.954
And
Additional Software is correctly configured for package "cowsay"
0.597
And
I shutdown Tails and wait for the computer to power off
3.789
And
I start Tails from USB drive "__internal" with network unplugged
33.208
And
I enable persistence
11.079
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.039
And
I log in to a new session
7.698
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.189
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.041
And
the network is plugged
0.036
And
available upgrades have been checked
1.135
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.894
And
I can open the Additional Software configuration window from the notification
2.378
And
I shutdown Tails and wait for the computer to power off
12.685
And
I start Tails from USB drive "__internal" with network unplugged
33.567
And
I enable persistence
11.120
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
6.912
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.140
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.068
And
the network is plugged
0.025
Then
the Additional Software upgrade service has started
0.039
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.056