And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:11.019
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.555
And
I accept adding "cowsay" to Additional Software
4.114
And
Additional Software is correctly configured for package "cowsay"
0.429
And
I shutdown Tails and wait for the computer to power off
2.525
And
I start Tails from USB drive "__internal" with network unplugged
31.706
And
I enable persistence
10.558
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
6.921
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.187
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.029
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.029
And
available upgrades have been checked
0.072
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.350
And
I can open the Additional Software configuration window from the notification
2.574
And
I shutdown Tails and wait for the computer to power off
17.529
And
I start Tails from USB drive "__internal" with network unplugged
33.155
And
I enable persistence
11.063
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.459
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.156
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.034
Then
the Additional Software upgrade service has started
0.060
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057