And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:10.912
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.197
And
I accept adding "cowsay" to Additional Software
4.108
And
Additional Software is correctly configured for package "cowsay"
0.470
And
I shutdown Tails and wait for the computer to power off
3.900
And
I start Tails from USB drive "__internal" with network unplugged
32.130
And
I enable persistence
10.618
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.046
And
I log in to a new session
6.363
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.174
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.085
And
the network is plugged
0.027
And
available upgrades have been checked
1.080
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.822
And
I can open the Additional Software configuration window from the notification
2.547
And
I shutdown Tails and wait for the computer to power off
18.827
And
I start Tails from USB drive "__internal" with network unplugged
32.491
And
I enable persistence
10.305
And
I configure APT to prefer an old version of cowsay
0.016
And
I log in to a new session
7.670
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.129
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.029
And
the network is plugged
0.029
Then
the Additional Software upgrade service has started
0.043
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.050