And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:24.947
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.614
And
I accept adding "cowsay" to Additional Software
5.010
And
Additional Software is correctly configured for package "cowsay"
0.658
And
I shutdown Tails and wait for the computer to power off
5.678
And
I start Tails from USB drive "__internal" with network unplugged
37.664
And
I enable persistence
10.028
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
10.952
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.222
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.071
And
I prepare the Additional Software upgrade process to fail
0.068
And
the network is plugged
0.017
And
available upgrades have been checked
1.093
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.004
And
I can open the Additional Software configuration window from the notification
2.540
And
I shutdown Tails and wait for the computer to power off
18.142
And
I start Tails from USB drive "__internal" with network unplugged
38.670
And
I enable persistence
11.432
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
11.607
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.315
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
the network is plugged
0.129
Then
the Additional Software upgrade service has started
0.074
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.085