And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.998
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.893
And
I accept adding "cowsay" to Additional Software
3.663
And
Additional Software is correctly configured for package "cowsay"
0.775
And
I shutdown Tails and wait for the computer to power off
4.205
And
I start Tails from USB drive "__internal" with network unplugged
36.299
And
I enable persistence
8.553
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.045
And
I log in to a new session
8.578
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.219
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.016
And
available upgrades have been checked
1.121
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.440
And
I can open the Additional Software configuration window from the notification
2.511
And
I shutdown Tails and wait for the computer to power off
22.281
And
I start Tails from USB drive "__internal" with network unplugged
36.338
And
I enable persistence
8.676
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.912
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.215
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.035
Then
the Additional Software upgrade service has started
0.056
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.047