And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.572
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.389
And
I accept adding "cowsay" to Additional Software
4.914
And
Additional Software is correctly configured for package "cowsay"
0.493
And
I shutdown Tails and wait for the computer to power off
2.542
And
I start Tails from USB drive "__internal" with network unplugged
32.617
And
I enable persistence
11.441
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.048
And
I log in to a new session
8.343
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.168
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.035
And
available upgrades have been checked
1.097
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.392
And
I can open the Additional Software configuration window from the notification
2.368
And
I shutdown Tails and wait for the computer to power off
17.683
And
I start Tails from USB drive "__internal" with network unplugged
33.136
And
I enable persistence
10.732
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.441
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.190
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
the network is plugged
0.035
Then
the Additional Software upgrade service has started
0.055
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.054