And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.547
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.586
And
I accept adding "cowsay" to Additional Software
4.889
And
Additional Software is correctly configured for package "cowsay"
0.573
And
I shutdown Tails and wait for the computer to power off
2.619
And
I start Tails from USB drive "__internal" with network unplugged
35.470
And
I enable persistence
11.898
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.048
And
I log in to a new session
8.324
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.191
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.069
And
the network is plugged
0.024
And
available upgrades have been checked
1.100
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.901
And
I can open the Additional Software configuration window from the notification
3.217
And
I shutdown Tails and wait for the computer to power off
18.417
And
I start Tails from USB drive "__internal" with network unplugged
35.501
And
I enable persistence
11.826
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.306
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.191
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.028
Then
the Additional Software upgrade service has started
0.063
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057