And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.235
And
I configure APT to prefer an old version of cowsay
0.016
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.826
And
I accept adding "cowsay" to Additional Software
4.848
And
Additional Software is correctly configured for package "cowsay"
0.601
And
I shutdown Tails and wait for the computer to power off
4.214
And
I start Tails from USB drive "__internal" with network unplugged
35.384
And
I enable persistence
12.162
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
7.925
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.197
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.084
And
the network is plugged
0.048
And
available upgrades have been checked
0.111
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.295
And
I can open the Additional Software configuration window from the notification
2.406
And
I shutdown Tails and wait for the computer to power off
13.005
And
I start Tails from USB drive "__internal" with network unplugged
33.841
And
I enable persistence
12.695
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.548
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.172
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.027
Then
the Additional Software upgrade service has started
0.035
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.042