And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:10.995
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.264
And
I accept adding "cowsay" to Additional Software
4.036
And
Additional Software is correctly configured for package "cowsay"
0.471
And
I shutdown Tails and wait for the computer to power off
2.676
And
I start Tails from USB drive "__internal" with network unplugged
31.698
And
I enable persistence
10.337
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.040
And
I log in to a new session
6.471
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.149
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.026
And
available upgrades have been checked
1.081
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.357
And
I can open the Additional Software configuration window from the notification
2.555
And
I shutdown Tails and wait for the computer to power off
17.483
And
I start Tails from USB drive "__internal" with network unplugged
32.278
And
I enable persistence
10.406
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.095
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.166
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.029
And
the network is plugged
0.034
Then
the Additional Software upgrade service has started
0.036
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.042