And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.000
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.030
And
I accept adding "cowsay" to Additional Software
5.004
And
Additional Software is correctly configured for package "cowsay"
0.638
And
I shutdown Tails and wait for the computer to power off
4.200
And
I start Tails from USB drive "__internal" with network unplugged
40.160
And
I enable persistence
5.618
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.063
And
I log in to a new session
11.731
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.219
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.057
And
the network is plugged
0.014
And
available upgrades have been checked
2.202
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.496
And
I can open the Additional Software configuration window from the notification
2.549
And
I shutdown Tails and wait for the computer to power off
12.733
And
I start Tails from USB drive "__internal" with network unplugged
40.322
And
I enable persistence
5.673
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
10.883
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.307
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.052
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.072