And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.568
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.355
And
I accept adding "cowsay" to Additional Software
4.892
And
Additional Software is correctly configured for package "cowsay"
0.818
And
I shutdown Tails and wait for the computer to power off
8.133
And
I start Tails from USB drive "__internal" with network unplugged
38.906
And
I enable persistence
7.378
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.067
And
I log in to a new session
9.693
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.174
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.015
And
available upgrades have been checked
2.156
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.654
And
I can open the Additional Software configuration window from the notification
2.596
And
I shutdown Tails and wait for the computer to power off
23.242
And
I start Tails from USB drive "__internal" with network unplugged
36.686
And
I enable persistence
5.667
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.974
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.195
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.087
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.074