And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.429
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.500
And
I accept adding "cowsay" to Additional Software
3.720
And
Additional Software is correctly configured for package "cowsay"
0.560
And
I shutdown Tails and wait for the computer to power off
4.007
And
I start Tails from USB drive "__internal" with network unplugged
36.328
And
I enable persistence
5.154
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.048
And
I log in to a new session
8.740
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.194
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.052
And
the network is plugged
0.018
And
available upgrades have been checked
1.075
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.946
And
I can open the Additional Software configuration window from the notification
2.499
And
I shutdown Tails and wait for the computer to power off
22.273
And
I start Tails from USB drive "__internal" with network unplugged
37.142
And
I enable persistence
5.442
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.304
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.214
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.048
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.070