And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.060
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.551
And
I accept adding "cowsay" to Additional Software
4.956
And
Additional Software is correctly configured for package "cowsay"
0.607
And
I shutdown Tails and wait for the computer to power off
8.083
And
I start Tails from USB drive "__internal" with network unplugged
38.212
And
I enable persistence
6.590
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.065
And
I log in to a new session
10.327
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.266
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.063
And
the network is plugged
0.016
And
available upgrades have been checked
2.153
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.503
And
I can open the Additional Software configuration window from the notification
2.529
And
I shutdown Tails and wait for the computer to power off
17.470
And
I start Tails from USB drive "__internal" with network unplugged
39.215
And
I enable persistence
7.483
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
11.010
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.185
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.042
Then
the Additional Software upgrade service has started
0.073
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.073