And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.518
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.420
And
I accept adding "cowsay" to Additional Software
3.615
And
Additional Software is correctly configured for package "cowsay"
0.614
And
I shutdown Tails and wait for the computer to power off
7.993
And
I start Tails from USB drive "__internal" with network unplugged
35.950
And
I enable persistence
6.238
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
8.352
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.225
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.080
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.016
And
available upgrades have been checked
1.141
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.455
And
I can open the Additional Software configuration window from the notification
2.493
And
I shutdown Tails and wait for the computer to power off
17.013
And
I start Tails from USB drive "__internal" with network unplugged
35.242
And
I enable persistence
5.226
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.784
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.162
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.053
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.054