And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.942
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.862
And
I accept adding "cowsay" to Additional Software
5.335
And
Additional Software is correctly configured for package "cowsay"
0.629
And
I shutdown Tails and wait for the computer to power off
8.919
And
I start Tails from USB drive "__internal" with network unplugged
38.644
And
I enable persistence
5.694
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.060
And
I log in to a new session
9.848
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.264
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.018
And
available upgrades have been checked
2.215
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.534
And
I can open the Additional Software configuration window from the notification
2.546
And
I shutdown Tails and wait for the computer to power off
23.227
And
I start Tails from USB drive "__internal" with network unplugged
38.601
And
I enable persistence
6.086
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
11.101
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.172
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.071
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.070