And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.324
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.045
And
I accept adding "cowsay" to Additional Software
3.878
And
Additional Software is correctly configured for package "cowsay"
0.695
And
I shutdown Tails and wait for the computer to power off
7.989
And
I start Tails from USB drive "__internal" with network unplugged
38.027
And
I enable persistence
9.892
And
I configure APT to prefer an old version of cowsay
0.032
And
I disable the tails-virt-notify-user.service user unit
0.069
And
I log in to a new session
10.547
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.174
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.017
And
available upgrades have been checked
1.091
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.974
And
I can open the Additional Software configuration window from the notification
2.543
And
I shutdown Tails and wait for the computer to power off
17.431
And
I start Tails from USB drive "__internal" with network unplugged
38.895
And
I enable persistence
11.148
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.657
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.224
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.063
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.083