And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.482
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.301
And
I accept adding "cowsay" to Additional Software
3.645
And
Additional Software is correctly configured for package "cowsay"
0.597
And
I shutdown Tails and wait for the computer to power off
8.097
And
I start Tails from USB drive "__internal" with network unplugged
36.449
And
I enable persistence
8.739
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
9.064
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.251
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.044
And
available upgrades have been checked
2.153
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.405
And
I can open the Additional Software configuration window from the notification
2.499
And
I shutdown Tails and wait for the computer to power off
13.674
And
I start Tails from USB drive "__internal" with network unplugged
36.354
And
I enable persistence
8.864
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.989
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.220
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.049
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058