And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.421
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.806
And
I accept adding "cowsay" to Additional Software
3.741
And
Additional Software is correctly configured for package "cowsay"
0.619
And
I shutdown Tails and wait for the computer to power off
8.013
And
I start Tails from USB drive "__internal" with network unplugged
36.543
And
I enable persistence
8.665
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.051
And
I log in to a new session
8.882
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.231
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.034
And
available upgrades have been checked
2.161
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.418
And
I can open the Additional Software configuration window from the notification
2.561
And
I shutdown Tails and wait for the computer to power off
17.184
And
I start Tails from USB drive "__internal" with network unplugged
36.452
And
I enable persistence
8.731
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.625
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.193
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.022
Then
the Additional Software upgrade service has started
0.051
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.071