And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:26.296
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.454
And
I accept adding "cowsay" to Additional Software
3.645
And
Additional Software is correctly configured for package "cowsay"
0.632
And
I shutdown Tails and wait for the computer to power off
7.798
And
I start Tails from USB drive "__internal" with network unplugged
35.711
And
I enable persistence
8.839
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.049
And
I log in to a new session
9.060
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.221
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.036
And
the network is plugged
0.018
And
available upgrades have been checked
1.086
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.487
And
I can open the Additional Software configuration window from the notification
2.510
And
I shutdown Tails and wait for the computer to power off
13.170
And
I start Tails from USB drive "__internal" with network unplugged
36.281
And
I enable persistence
8.658
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.203
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.166
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.063
Then
the Additional Software upgrade service has started
0.055
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058