And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.418
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.614
And
I accept adding "cowsay" to Additional Software
3.622
And
Additional Software is correctly configured for package "cowsay"
0.571
And
I shutdown Tails and wait for the computer to power off
4.067
And
I start Tails from USB drive "__internal" with network unplugged
35.839
And
I enable persistence
8.573
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.081
And
I log in to a new session
9.398
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.231
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.045
And
the network is plugged
0.020
And
available upgrades have been checked
1.092
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.462
And
I can open the Additional Software configuration window from the notification
2.475
And
I shutdown Tails and wait for the computer to power off
17.083
And
I start Tails from USB drive "__internal" with network unplugged
35.967
And
I enable persistence
8.668
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.132
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.502
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.052
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061