And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.354
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.837
And
I accept adding "cowsay" to Additional Software
3.657
And
Additional Software is correctly configured for package "cowsay"
0.601
And
I shutdown Tails and wait for the computer to power off
8.027
And
I start Tails from USB drive "__internal" with network unplugged
36.175
And
I enable persistence
9.200
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.046
And
I log in to a new session
9.437
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.216
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.041
And
the network is plugged
0.012
And
available upgrades have been checked
2.146
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.515
And
I can open the Additional Software configuration window from the notification
2.511
And
I shutdown Tails and wait for the computer to power off
13.027
And
I start Tails from USB drive "__internal" with network unplugged
35.943
And
I enable persistence
8.913
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.914
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.536
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.021
Then
the Additional Software upgrade service has started
0.057
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.089