And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.253
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.858
And
I accept adding "cowsay" to Additional Software
4.794
And
Additional Software is correctly configured for package "cowsay"
0.656
And
I shutdown Tails and wait for the computer to power off
8.257
And
I start Tails from USB drive "__internal" with network unplugged
38.046
And
I enable persistence
9.978
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
9.520
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.208
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
I prepare the Additional Software upgrade process to fail
0.045
And
the network is plugged
0.015
And
available upgrades have been checked
2.168
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.508
And
I can open the Additional Software configuration window from the notification
2.562
And
I shutdown Tails and wait for the computer to power off
17.507
And
I start Tails from USB drive "__internal" with network unplugged
36.871
And
I enable persistence
9.406
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
10.258
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.229
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.052
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057