And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.951
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.617
And
I accept adding "cowsay" to Additional Software
4.816
And
Additional Software is correctly configured for package "cowsay"
0.654
And
I shutdown Tails and wait for the computer to power off
4.115
And
I start Tails from USB drive "__internal" with network unplugged
38.209
And
I enable persistence
5.526
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.066
And
I log in to a new session
10.142
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.192
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
I prepare the Additional Software upgrade process to fail
0.043
And
the network is plugged
0.017
And
available upgrades have been checked
3.223
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.441
And
I can open the Additional Software configuration window from the notification
2.548
And
I shutdown Tails and wait for the computer to power off
17.639
And
I start Tails from USB drive "__internal" with network unplugged
38.265
And
I enable persistence
5.699
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.315
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.244
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
the network is plugged
0.028
Then
the Additional Software upgrade service has started
0.059
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.055