And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:24.819
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.345
And
I accept adding "cowsay" to Additional Software
4.993
And
Additional Software is correctly configured for package "cowsay"
1.127
And
I shutdown Tails and wait for the computer to power off
9.022
And
I start Tails from USB drive "__internal" with network unplugged
41.324
And
I enable persistence
6.978
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.081
And
I log in to a new session
11.333
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.223
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.076
And
the network is plugged
0.023
And
available upgrades have been checked
2.229
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.221
And
I can open the Additional Software configuration window from the notification
2.594
And
I shutdown Tails and wait for the computer to power off
17.732
And
I start Tails from USB drive "__internal" with network unplugged
41.142
And
I enable persistence
6.797
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
13.754
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.235
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
the network is plugged
0.025
Then
the Additional Software upgrade service has started
0.066
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062