And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:19.011
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.706
And
I accept adding "cowsay" to Additional Software
7.528
And
Additional Software is correctly configured for package "cowsay"
0.968
And
I shutdown Tails and wait for the computer to power off
6.416
And
I start Tails from USB drive "__internal" with network unplugged
59.610
And
I enable persistence
11.836
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.081
And
I log in to a new session
45.108
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.084
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
I prepare the Additional Software upgrade process to fail
0.074
And
the network is plugged
0.080
And
available upgrades have been checked
1.132
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.209
And
I can open the Additional Software configuration window from the notification
2.418
And
I shutdown Tails and wait for the computer to power off
13.234
And
I start Tails from USB drive "__internal" with network unplugged
1:0.566
And
I enable persistence
12.260
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
40.770
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.023
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
the network is plugged
0.077
Then
the Additional Software upgrade service has started
0.179
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.101