And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.904
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.698
And
I accept adding "cowsay" to Additional Software
4.942
And
Additional Software is correctly configured for package "cowsay"
0.738
And
I shutdown Tails and wait for the computer to power off
8.318
And
I start Tails from USB drive "__internal" with network unplugged
39.908
And
I enable persistence
6.627
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.124
And
I log in to a new session
12.179
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.237
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.030
And
I prepare the Additional Software upgrade process to fail
0.060
And
the network is plugged
0.018
And
available upgrades have been checked
2.191
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.023
And
I can open the Additional Software configuration window from the notification
2.578
And
I shutdown Tails and wait for the computer to power off
23.706
And
I start Tails from USB drive "__internal" with network unplugged
39.763
And
I enable persistence
7.020
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
10.961
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.240
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
the network is plugged
0.061
Then
the Additional Software upgrade service has started
0.062
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062