And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.941
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.719
And
I accept adding "cowsay" to Additional Software
5.078
And
Additional Software is correctly configured for package "cowsay"
0.727
And
I shutdown Tails and wait for the computer to power off
4.176
And
I start Tails from USB drive "__internal" with network unplugged
39.499
And
I enable persistence
6.683
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
12.245
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.292
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.083
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.024
And
available upgrades have been checked
2.187
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.534
And
I can open the Additional Software configuration window from the notification
2.568
And
I shutdown Tails and wait for the computer to power off
18.061
And
I start Tails from USB drive "__internal" with network unplugged
40.116
And
I enable persistence
6.749
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
12.106
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.169
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
the network is plugged
0.036
Then
the Additional Software upgrade service has started
0.050
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067