And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
3:9.920
And
I configure APT to prefer an old version of cowsay
0.082
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
31.924
And
I accept adding "cowsay" to Additional Software
10.413
And
Additional Software is correctly configured for package "cowsay"
1.817
And
I shutdown Tails and wait for the computer to power off
6.717
And
I start Tails from USB drive "__internal" with network unplugged
1:25.295
And
I enable persistence
16.379
And
I configure APT to prefer an old version of cowsay
0.801
And
I disable the tails-virt-notify-user.service user unit
0.729
And
I log in to a new session
52.303
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
43.488
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.067
And
I prepare the Additional Software upgrade process to fail
0.082
And
the network is plugged
0.137
And
available upgrades have been checked
0.360
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
6.500
And
I can open the Additional Software configuration window from the notification
2.981
And
I shutdown Tails and wait for the computer to power off
19.680
And
I start Tails from USB drive "__internal" with network unplugged
1:22.559
And
I enable persistence
21.827
And
I configure APT to prefer an old version of cowsay
2.397
And
I log in to a new session
1:10.166
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
45.122
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.075
And
the network is plugged
0.107
Then
the Additional Software upgrade service has started
0.373
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.256