And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
3:15.005
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
34.869
And
I accept adding "cowsay" to Additional Software
5.974
And
Additional Software is correctly configured for package "cowsay"
0.975
And
I shutdown Tails and wait for the computer to power off
12.141
And
I start Tails from USB drive "__internal" with network unplugged
1:16.831
And
I enable persistence
22.719
And
I configure APT to prefer an old version of cowsay
0.553
And
I disable the tails-virt-notify-user.service user unit
0.291
And
I log in to a new session
45.279
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
43.049
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.101
And
I prepare the Additional Software upgrade process to fail
0.201
And
the network is plugged
0.118
And
available upgrades have been checked
0.158
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
7.297
And
I can open the Additional Software configuration window from the notification
3.134
And
I shutdown Tails and wait for the computer to power off
20.379
And
I start Tails from USB drive "__internal" with network unplugged
1:25.804
And
I enable persistence
18.682
And
I configure APT to prefer an old version of cowsay
0.355
And
I log in to a new session
56.155
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.286
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.068
Then
the Additional Software upgrade service has started
0.461
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.324