And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:56.076
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
36.182
And
I accept adding "cowsay" to Additional Software
4.769
And
Additional Software is correctly configured for package "cowsay"
1.005
And
I shutdown Tails and wait for the computer to power off
9.894
And
I start Tails from USB drive "__internal" with network unplugged
1:19.121
And
I enable persistence
18.643
And
I configure APT to prefer an old version of cowsay
0.176
And
I disable the tails-virt-notify-user.service user unit
0.197
And
I log in to a new session
54.150
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.934
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.346
And
I prepare the Additional Software upgrade process to fail
1.247
And
the network is plugged
1.124
And
available upgrades have been checked
0.106
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.173
And
I can open the Additional Software configuration window from the notification
3.440
And
I shutdown Tails and wait for the computer to power off
17.835
And
I start Tails from USB drive "__internal" with network unplugged
1:20.341
And
I enable persistence
18.081
And
I configure APT to prefer an old version of cowsay
0.054
And
I log in to a new session
56.359
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
44.371
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.091
And
the network is plugged
0.072
Then
the Additional Software upgrade service has started
0.230
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.152