And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:58.165
And
I configure APT to prefer an old version of cowsay
0.030
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
30.007
And
I accept adding "cowsay" to Additional Software
7.630
And
Additional Software is correctly configured for package "cowsay"
1.144
And
I shutdown Tails and wait for the computer to power off
6.427
And
I start Tails from USB drive "__internal" with network unplugged
1:8.946
And
I enable persistence
13.036
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.142
And
I log in to a new session
44.341
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
43.582
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.097
And
I prepare the Additional Software upgrade process to fail
0.089
And
the network is plugged
0.097
And
available upgrades have been checked
1.390
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.348
And
I can open the Additional Software configuration window from the notification
2.604
And
I shutdown Tails and wait for the computer to power off
18.550
And
I start Tails from USB drive "__internal" with network unplugged
1:8.986
And
I enable persistence
15.888
And
I configure APT to prefer an old version of cowsay
0.029
And
I log in to a new session
42.693
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
44.296
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
the network is plugged
0.073
Then
the Additional Software upgrade service has started
0.242
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.220