And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:39.195
And
I configure APT to prefer an old version of cowsay
0.031
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.476
And
I accept adding "cowsay" to Additional Software
4.898
And
Additional Software is correctly configured for package "cowsay"
1.136
And
I shutdown Tails and wait for the computer to power off
6.640
And
I start Tails from USB drive "__internal" with network unplugged
1:11.959
And
I enable persistence
13.128
And
I configure APT to prefer an old version of cowsay
0.029
And
I disable the tails-virt-notify-user.service user unit
0.097
And
I log in to a new session
45.192
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
44.759
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.090
And
I prepare the Additional Software upgrade process to fail
0.068
And
the network is plugged
0.191
And
available upgrades have been checked
1.355
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.660
And
I can open the Additional Software configuration window from the notification
3.529
And
I shutdown Tails and wait for the computer to power off
19.952
And
I start Tails from USB drive "__internal" with network unplugged
1:13.550
And
I enable persistence
13.732
And
I configure APT to prefer an old version of cowsay
0.032
And
I log in to a new session
43.332
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
44.821
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.081
Then
the Additional Software upgrade service has started
0.205
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.123