Cucumber Reports (no 3190) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_devel	3190	12 Dec 2023, 12:15

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:35.866	Passed

Tags: @product @not_release_blocker

37.536

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.136

And I temporarily create a 4 GiB disk named "gptfat" 0.052

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.049

And I plug USB drive "gptfat" 2.473

When I start Tails Installer 21.768

Then I am told by Tails Installer that the destination device "is too small" 0.056

Hooks

After features/support/hooks.rb:291 1.011

After features/support/hooks.rb:75 0.001

Tags: @product

34.187

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.327

And I temporarily create a 7200 MiB disk named "temp" 0.049

And I start Tails Installer 22.755

But a suitable USB device is not found 0.025

When I plug USB drive "temp" 2.735

Then the "temp" USB drive is selected 0.074

When I unplug USB drive "temp" 0.188

Then a suitable USB device is not found 0.030

Hooks

After features/support/hooks.rb:291 0.662

After features/support/hooks.rb:75 0.000

Tags: @product

4:24.410

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.813

And I temporarily create a 7200 MiB disk named "install" 0.062

And I create a gpt partition with a vfat filesystem on disk "install" 4.186

And I plug USB drive "install" 2.464

And I install Tails to USB drive "install" by cloning 3:56.093

Then the running Tails is installed on USB drive "install" 13.709

But there is no persistence partition on USB drive "install" 0.079

Hooks

After features/support/hooks.rb:291 1.026

After features/support/hooks.rb:75 0.104

Tags: @product

3:53.687

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.078

And I temporarily create a 7200 MiB disk named "install" 0.096

And I plug USB drive "install" 2.524

And I install Tails to USB drive "install" by cloning 3:31.708

Then the running Tails is installed on USB drive "install" 11.201

But there is no persistence partition on USB drive "install" 0.077

Hooks

After features/support/hooks.rb:291 1.158

After features/support/hooks.rb:75 0.102

Tags: @product

4:29.013

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.882

And I create a file in the Persistent directory 0.113

And I temporarily create a 7200 MiB disk named "install" 0.048

And I create a gpt partition with a vfat filesystem on disk "install" 5.155

And I plug USB drive "install" 2.489

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:53.009

Then the running Tails is installed on USB drive "install" 13.966

And there is a persistence partition on USB drive "install" 0.089

And the USB drive "install" contains the same files as my persistent storage 3.257

Hooks

After features/support/hooks.rb:291 1.868

After features/support/hooks.rb:75 0.116

Tags: @product

4:2.593

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.869

And I temporarily create a 7200 MiB disk named "install" 0.335

And I plug USB drive "install" 2.502

And I install Tails to USB drive "install" by cloning 3:32.714

Then the running Tails is installed on USB drive "install" 16.058

And there is no persistence partition on USB drive "install" 0.113

Hooks

After features/support/hooks.rb:291 1.808

After features/support/hooks.rb:75 0.097

Tags: @product

4:2.565

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.247

And I have started Tails from DVD without network and logged in 9.266

And I clone USB drive "__internal" to a temporary USB drive "install" 1.091

And I plug USB drive "install" 2.454

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:28.073

Then the running Tails is installed on USB drive "install" 12.362

And there is no persistence partition on USB drive "install" 0.069

Hooks

After features/support/hooks.rb:291 1.089

After features/support/hooks.rb:75 0.113

Tags: @product @uefi

1:24.629

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.120

And I power off the computer 0.318

And the computer is set to boot in UEFI mode 0.024

When I start Tails from USB drive "__internal" with network unplugged and I login 1:8.026

Then Tails is running from USB drive "__internal" 1.248

And the boot device has safe access rights 3.832

And Tails has started in UEFI mode 0.057

Hooks

After features/support/hooks.rb:291 0.621

After features/support/hooks.rb:75 0.006

Tags: @product

1:59.906

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 7.983

And I plug and mount a USB drive containing a Tails USB image 30.490

And I create a 7200 MiB disk named "usbimage" 0.041

And I plug USB drive "usbimage" 2.469

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:18.922

Hooks

After features/support/hooks.rb:291 2.267

After features/support/hooks.rb:75 0.081

Tags: @product

1:7.335

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given a computer 0.177

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:5.705

Then Tails is running from USB drive "usbimage" 0.494

And the label of the system partition on "usbimage" is "Tails" 0.252

And the system partition on "usbimage" is an EFI system partition 0.203

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.163

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.105

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.122

And the system partition on "usbimage" has the expected flags 0.111

Hooks

After features/support/hooks.rb:291 0.717

After features/support/hooks.rb:75 0.005

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:35.866	Passed

Feature Report