Cucumber Reports (no 3194) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_devel	3194	14 Dec 2023, 12:11

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:32.044	Passed

Tags: @product @not_release_blocker

37.174

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.015

Steps

Given I have started Tails from DVD without network and logged in 8.369

And I temporarily create a 4 GiB disk named "gptfat" 0.072

And I create a gpt partition with a vfat filesystem on disk "gptfat" 4.217

And I plug USB drive "gptfat" 2.472

When I start Tails Installer 21.994

Then I am told by Tails Installer that the destination device "is too small" 0.047

Hooks

After features/support/hooks.rb:291 1.022

After features/support/hooks.rb:75 0.001

Tags: @product

32.700

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 7.874

And I temporarily create a 7200 MiB disk named "temp" 0.046

And I start Tails Installer 21.699

But a suitable USB device is not found 0.020

When I plug USB drive "temp" 2.775

Then the "temp" USB drive is selected 0.082

When I unplug USB drive "temp" 0.180

Then a suitable USB device is not found 0.021

Hooks

After features/support/hooks.rb:291 0.728

After features/support/hooks.rb:75 0.000

Tags: @product

3:54.422

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.105

And I temporarily create a 7200 MiB disk named "install" 0.054

And I create a gpt partition with a vfat filesystem on disk "install" 4.115

And I plug USB drive "install" 2.481

And I install Tails to USB drive "install" by cloning 3:28.989

Then the running Tails is installed on USB drive "install" 10.611

But there is no persistence partition on USB drive "install" 0.064

Hooks

After features/support/hooks.rb:291 0.989

After features/support/hooks.rb:75 0.103

Tags: @product

3:51.590

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.196

And I temporarily create a 7200 MiB disk named "install" 0.042

And I plug USB drive "install" 2.499

And I install Tails to USB drive "install" by cloning 3:30.232

Then the running Tails is installed on USB drive "install" 10.540

But there is no persistence partition on USB drive "install" 0.079

Hooks

After features/support/hooks.rb:291 1.059

After features/support/hooks.rb:75 0.205

Tags: @product

4:25.335

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.030

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.528

And I create a file in the Persistent directory 0.127

And I temporarily create a 7200 MiB disk named "install" 0.051

And I create a gpt partition with a vfat filesystem on disk "install" 4.078

And I plug USB drive "install" 2.435

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:52.395

Then the running Tails is installed on USB drive "install" 12.325

And there is a persistence partition on USB drive "install" 0.066

And the USB drive "install" contains the same files as my persistent storage 3.326

Hooks

After features/support/hooks.rb:291 1.789

After features/support/hooks.rb:75 0.113

Tags: @product

3:56.221

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.087

And I temporarily create a 7200 MiB disk named "install" 0.056

And I plug USB drive "install" 2.410

And I install Tails to USB drive "install" by cloning 3:29.379

Then the running Tails is installed on USB drive "install" 14.212

And there is no persistence partition on USB drive "install" 0.075

Hooks

After features/support/hooks.rb:291 1.456

After features/support/hooks.rb:75 0.088

Tags: @product

4:0.153

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.029

And I have started Tails from DVD without network and logged in 8.072

And I clone USB drive "__internal" to a temporary USB drive "install" 1.124

And I plug USB drive "install" 2.417

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:29.572

Then the running Tails is installed on USB drive "install" 9.873

And there is no persistence partition on USB drive "install" 0.063

Hooks

After features/support/hooks.rb:291 1.189

After features/support/hooks.rb:75 0.134

Tags: @product @uefi

1:22.417

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 9.934

And I power off the computer 0.325

And the computer is set to boot in UEFI mode 0.024

When I start Tails from USB drive "__internal" with network unplugged and I login 1:8.057

Then Tails is running from USB drive "__internal" 0.424

And the boot device has safe access rights 3.600

And Tails has started in UEFI mode 0.051

Hooks

After features/support/hooks.rb:291 0.619

After features/support/hooks.rb:75 0.005

Tags: @product

1:48.970

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.768

And I plug and mount a USB drive containing a Tails USB image 27.263

And I create a 7200 MiB disk named "usbimage" 0.080

And I plug USB drive "usbimage" 2.416

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:11.441

Hooks

After features/support/hooks.rb:291 2.159

After features/support/hooks.rb:75 0.080

Tags: @product

1:3.057

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.145

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:1.672

Then Tails is running from USB drive "usbimage" 0.409

And the label of the system partition on "usbimage" is "Tails" 0.222

And the system partition on "usbimage" is an EFI system partition 0.188

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.161

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.075

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.094

And the system partition on "usbimage" has the expected flags 0.088

Hooks

After features/support/hooks.rb:291 0.666

After features/support/hooks.rb:75 0.005

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:32.044	Passed

Feature Report