Cucumber Reports (no 3195) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_devel	3195	15 Dec 2023, 12:17

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:19.011	Passed

Tags: @product @not_release_blocker

35.639

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 7.943

And I temporarily create a 4 GiB disk named "gptfat" 0.061

And I create a gpt partition with a vfat filesystem on disk "gptfat" 3.954

And I plug USB drive "gptfat" 2.409

When I start Tails Installer 21.214

Then I am told by Tails Installer that the destination device "is too small" 0.056

Hooks

After features/support/hooks.rb:291 1.000

After features/support/hooks.rb:75 0.001

Tags: @product

33.461

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.987

And I temporarily create a 7200 MiB disk named "temp" 0.055

And I start Tails Installer 21.279

But a suitable USB device is not found 0.039

When I plug USB drive "temp" 2.810

Then the "temp" USB drive is selected 0.087

When I unplug USB drive "temp" 0.177

Then a suitable USB device is not found 0.022

Hooks

After features/support/hooks.rb:291 0.750

After features/support/hooks.rb:75 0.000

Tags: @product

3:55.217

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.857

And I temporarily create a 7200 MiB disk named "install" 0.065

And I create a gpt partition with a vfat filesystem on disk "install" 4.093

And I plug USB drive "install" 2.425

And I install Tails to USB drive "install" by cloning 3:31.194

Then the running Tails is installed on USB drive "install" 9.497

But there is no persistence partition on USB drive "install" 0.082

Hooks

After features/support/hooks.rb:291 1.027

After features/support/hooks.rb:75 0.100

Tags: @product

3:49.864

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.905

And I temporarily create a 7200 MiB disk named "install" 0.058

And I plug USB drive "install" 2.460

And I install Tails to USB drive "install" by cloning 3:29.599

Then the running Tails is installed on USB drive "install" 9.766

But there is no persistence partition on USB drive "install" 0.073

Hooks

After features/support/hooks.rb:291 0.993

After features/support/hooks.rb:75 0.101

Tags: @product

4:13.031

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.287

And I create a file in the Persistent directory 0.124

And I temporarily create a 7200 MiB disk named "install" 0.054

And I create a gpt partition with a vfat filesystem on disk "install" 4.110

And I plug USB drive "install" 2.412

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:40.971

Then the running Tails is installed on USB drive "install" 12.093

And there is a persistence partition on USB drive "install" 0.051

And the USB drive "install" contains the same files as my persistent storage 2.925

Hooks

After features/support/hooks.rb:291 1.555

After features/support/hooks.rb:75 0.112

Tags: @product

3:54.208

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.227

And I temporarily create a 7200 MiB disk named "install" 0.055

And I plug USB drive "install" 2.404

And I install Tails to USB drive "install" by cloning 3:28.635

Then the running Tails is installed on USB drive "install" 12.823

And there is no persistence partition on USB drive "install" 0.061

Hooks

After features/support/hooks.rb:291 1.257

After features/support/hooks.rb:75 0.089

Tags: @product

4:19.931

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.394

And I have started Tails from DVD without network and logged in 8.342

And I clone USB drive "__internal" to a temporary USB drive "install" 0.999

And I plug USB drive "install" 2.398

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:48.278

Then the running Tails is installed on USB drive "install" 10.437

And there is no persistence partition on USB drive "install" 0.080

Hooks

After features/support/hooks.rb:291 0.935

After features/support/hooks.rb:75 0.110

Tags: @product @uefi

1:19.807

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.011

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 10.191

And I power off the computer 0.344

And the computer is set to boot in UEFI mode 0.025

When I start Tails from USB drive "__internal" with network unplugged and I login 1:5.163

Then Tails is running from USB drive "__internal" 0.417

And the boot device has safe access rights 3.615

And Tails has started in UEFI mode 0.048

Hooks

After features/support/hooks.rb:291 0.622

After features/support/hooks.rb:75 0.008

Tags: @product

1:33.202

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.315

And I plug and mount a USB drive containing a Tails USB image 27.443

And I create a 7200 MiB disk named "usbimage" 0.194

And I plug USB drive "usbimage" 2.416

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 54.833

Hooks

After features/support/hooks.rb:291 1.438

After features/support/hooks.rb:75 0.084

Tags: @product

1:4.646

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given a computer 0.216

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:3.236

Then Tails is running from USB drive "usbimage" 0.445

And the label of the system partition on "usbimage" is "Tails" 0.214

And the system partition on "usbimage" is an EFI system partition 0.144

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.120

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.090

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.089

And the system partition on "usbimage" has the expected flags 0.087

Hooks

After features/support/hooks.rb:291 0.620

After features/support/hooks.rb:75 0.005

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:19.011	Passed

Feature Report