Cucumber Reports (no 3212) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_devel	3212	25 Dec 2023, 17:47

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:27.061	Passed

Tags: @product @not_release_blocker

35.404

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.680

And I temporarily create a 4 GiB disk named "gptfat" 0.053

And I create a gpt partition with a vfat filesystem on disk "gptfat" 3.985

And I plug USB drive "gptfat" 2.383

When I start Tails Installer 21.259

Then I am told by Tails Installer that the destination device "is too small" 0.041

Hooks

After features/support/hooks.rb:291 0.980

After features/support/hooks.rb:75 0.001

Tags: @product

33.767

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.982

And I temporarily create a 7200 MiB disk named "temp" 0.048

And I start Tails Installer 21.757

But a suitable USB device is not found 0.017

When I plug USB drive "temp" 2.664

Then the "temp" USB drive is selected 0.073

When I unplug USB drive "temp" 0.183

Then a suitable USB device is not found 0.039

Hooks

After features/support/hooks.rb:291 0.729

After features/support/hooks.rb:75 0.000

Tags: @product

3:54.149

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.264

And I temporarily create a 7200 MiB disk named "install" 0.067

And I create a gpt partition with a vfat filesystem on disk "install" 5.223

And I plug USB drive "install" 2.379

And I install Tails to USB drive "install" by cloning 3:27.816

Then the running Tails is installed on USB drive "install" 10.314

But there is no persistence partition on USB drive "install" 0.083

Hooks

After features/support/hooks.rb:291 1.020

After features/support/hooks.rb:75 0.105

Tags: @product

3:49.374

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.850

And I temporarily create a 7200 MiB disk named "install" 0.043

And I plug USB drive "install" 2.430

And I install Tails to USB drive "install" by cloning 3:27.879

Then the running Tails is installed on USB drive "install" 10.109

But there is no persistence partition on USB drive "install" 0.060

Hooks

After features/support/hooks.rb:291 1.127

After features/support/hooks.rb:75 0.112

Tags: @product

4:15.540

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.375

And I create a file in the Persistent directory 0.089

And I temporarily create a 7200 MiB disk named "install" 0.332

And I create a gpt partition with a vfat filesystem on disk "install" 4.300

And I plug USB drive "install" 2.446

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:40.646

Then the running Tails is installed on USB drive "install" 14.175

And there is a persistence partition on USB drive "install" 0.067

And the USB drive "install" contains the same files as my persistent storage 3.105

Hooks

After features/support/hooks.rb:291 2.025

After features/support/hooks.rb:75 0.114

Tags: @product

3:57.353

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.053

And I temporarily create a 7200 MiB disk named "install" 0.066

And I plug USB drive "install" 2.447

And I install Tails to USB drive "install" by cloning 3:30.413

Then the running Tails is installed on USB drive "install" 12.315

And there is no persistence partition on USB drive "install" 0.055

Hooks

After features/support/hooks.rb:291 1.568

After features/support/hooks.rb:75 0.092

Tags: @product

4:3.058

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.191

And I have started Tails from DVD without network and logged in 8.286

And I clone USB drive "__internal" to a temporary USB drive "install" 1.099

And I plug USB drive "install" 2.399

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:30.913

Then the running Tails is installed on USB drive "install" 10.087

And there is no persistence partition on USB drive "install" 0.080

Hooks

After features/support/hooks.rb:291 1.027

After features/support/hooks.rb:75 0.111

Tags: @product @uefi

1:26.906

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 10.381

And I power off the computer 0.334

And the computer is set to boot in UEFI mode 0.108

When I start Tails from USB drive "__internal" with network unplugged and I login 1:12.243

Then Tails is running from USB drive "__internal" 0.516

And the boot device has safe access rights 3.260

And Tails has started in UEFI mode 0.061

Hooks

After features/support/hooks.rb:291 0.657

After features/support/hooks.rb:75 0.014

Tags: @product

1:43.227

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.910

And I plug and mount a USB drive containing a Tails USB image 25.922

And I create a 7200 MiB disk named "usbimage" 0.038

And I plug USB drive "usbimage" 2.400

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:6.955

Hooks

After features/support/hooks.rb:291 1.846

After features/support/hooks.rb:75 0.082

Tags: @product

1:8.278

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given a computer 0.268

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:6.619

Then Tails is running from USB drive "usbimage" 0.530

And the label of the system partition on "usbimage" is "Tails" 0.201

And the system partition on "usbimage" is an EFI system partition 0.179

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.186

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.097

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.098

And the system partition on "usbimage" has the expected flags 0.096

Hooks

After features/support/hooks.rb:291 0.740

After features/support/hooks.rb:75 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:27.061	Passed

Feature Report