Cucumber Reports (no 3221) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_devel	3221	03 Jan 2024, 12:15

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:53.711	Passed

Tags: @product @not_release_blocker

37.865

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.088

And I temporarily create a 4 GiB disk named "gptfat" 0.046

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.056

And I plug USB drive "gptfat" 2.521

When I start Tails Installer 22.101

Then I am told by Tails Installer that the destination device "is too small" 0.050

Hooks

After features/support/hooks.rb:291 1.017

After features/support/hooks.rb:75 0.001

Tags: @product

34.549

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.563

And I temporarily create a 7200 MiB disk named "temp" 0.053

And I start Tails Installer 22.742

But a suitable USB device is not found 0.019

When I plug USB drive "temp" 2.829

Then the "temp" USB drive is selected 0.108

When I unplug USB drive "temp" 0.210

Then a suitable USB device is not found 0.022

Hooks

After features/support/hooks.rb:291 0.761

After features/support/hooks.rb:75 0.000

Tags: @product

3:54.666

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.450

And I temporarily create a 7200 MiB disk named "install" 0.045

And I create a gpt partition with a vfat filesystem on disk "install" 4.179

And I plug USB drive "install" 2.479

And I install Tails to USB drive "install" by cloning 3:28.497

Then the running Tails is installed on USB drive "install" 10.887

But there is no persistence partition on USB drive "install" 0.125

Hooks

After features/support/hooks.rb:291 1.284

After features/support/hooks.rb:75 0.102

Tags: @product

3:50.615

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.326

And I temporarily create a 7200 MiB disk named "install" 0.044

And I plug USB drive "install" 2.480

And I install Tails to USB drive "install" by cloning 3:28.470

Then the running Tails is installed on USB drive "install" 11.190

But there is no persistence partition on USB drive "install" 0.102

Hooks

After features/support/hooks.rb:291 1.033

After features/support/hooks.rb:75 0.126

Tags: @product

4:31.424

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 13.615

And I create a file in the Persistent directory 0.139

And I temporarily create a 7200 MiB disk named "install" 0.192

And I create a gpt partition with a vfat filesystem on disk "install" 5.812

And I plug USB drive "install" 2.458

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:52.051

Then the running Tails is installed on USB drive "install" 13.567

And there is a persistence partition on USB drive "install" 0.095

And the USB drive "install" contains the same files as my persistent storage 3.491

Hooks

After features/support/hooks.rb:291 1.939

After features/support/hooks.rb:75 0.120

Tags: @product

4:1.814

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 13.832

And I temporarily create a 7200 MiB disk named "install" 0.039

And I plug USB drive "install" 2.438

And I install Tails to USB drive "install" by cloning 3:30.676

Then the running Tails is installed on USB drive "install" 14.743

And there is no persistence partition on USB drive "install" 0.084

Hooks

After features/support/hooks.rb:291 1.825

After features/support/hooks.rb:75 0.098

Tags: @product

4:3.025

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.431

And I have started Tails from DVD without network and logged in 8.651

And I clone USB drive "__internal" to a temporary USB drive "install" 1.083

And I plug USB drive "install" 2.437

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:28.246

Then the running Tails is installed on USB drive "install" 12.100

And there is no persistence partition on USB drive "install" 0.073

Hooks

After features/support/hooks.rb:291 0.954

After features/support/hooks.rb:75 0.110

Tags: @product @uefi

1:31.990

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 9.859

And I power off the computer 0.331

And the computer is set to boot in UEFI mode 0.027

When I start Tails from USB drive "__internal" with network unplugged and I login 1:16.895

Then Tails is running from USB drive "__internal" 0.377

And the boot device has safe access rights 4.447

And Tails has started in UEFI mode 0.050

Hooks

After features/support/hooks.rb:291 0.679

After features/support/hooks.rb:75 0.012

Tags: @product

1:38.079

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.406

And I plug and mount a USB drive containing a Tails USB image 30.931

And I create a 7200 MiB disk named "usbimage" 0.043

And I plug USB drive "usbimage" 2.431

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 56.266

Hooks

After features/support/hooks.rb:291 1.737

After features/support/hooks.rb:75 0.136

Tags: @product

1:9.680

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.006

Steps

Given a computer 0.196

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:8.283

Then Tails is running from USB drive "usbimage" 0.447

And the label of the system partition on "usbimage" is "Tails" 0.182

And the system partition on "usbimage" is an EFI system partition 0.135

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.148

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.077

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.110

And the system partition on "usbimage" has the expected flags 0.097

Hooks

After features/support/hooks.rb:291 0.657

After features/support/hooks.rb:75 0.007

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:53.711	Passed

Feature Report